Pilbara
B&T Drilling supports selected Reverse Circulation exploration and remote drilling projects throughout the Pilbara where the project requirements suit our equipment and operational setup.
Each program, whether water bores or exploration, is assessed individually based on location, geology, access, and expected drilling conditions.
Selected RC Exploration Drilling Across the Pilbara
Planning for Pilbara Conditions
Pilbara water bore drilling and exploration projects may involve hard and abrasive formations, fractured ground, banded iron formations, chert and paleochannel deposits.
The region can also present significant logistical and environmental challenges, including heat, long travel distances, remote access and limited availability of services and supplies.
These factors are considered during project planning. Before mobilisation, we review the proposed hole depths, drill-pad access, expected geology, sampling requirements and the support arrangements available on site.
RC Drilling Capability
Our Thor RC 5000 is primarily configured for hard-rock water bore drilling but retains the capability to undertake selected RC exploration work.
The rig uses compressed air, down-the-hole hammer equipment and dual-wall drill rods to return rock-chip samples to the surface. The most suitable setup depends on the target depth, hole diameter, geology, groundwater and the client’s sampling requirements.
*Drilling rates and sample return cannot be guaranteed, as both may change significantly with ground and groundwater conditions.
Remote Mobilisation and Support
Pilbara mobilisation requires clear planning around transport, fuel, water, tooling, spare parts and the availability of mechanical support.
Our drilling operation is supported by heavy-duty trucks and smaller field vehicles that can carry drill rods, tooling, fuel and other necessary equipment. The specific combination of vehicles and equipment is selected according to the project and access conditions.
Before accepting a drilling program, we review the operator’s equipment, safety, environmental and induction standards to confirm whether our proposed setup is suitable.
We do not represent our equipment as automatically compliant with every mine or exploration site. Any project-specific modifications or additional requirements must be identified and agreed upon before mobilisation.
EXPLORE OUR SERVICES
Water bore drilling and selected exploration services across Western Australia
B&T Drilling provides hard rock water bore drilling, bore cleanouts and selected Reverse Circulation exploration drilling services across Western Australia.
Our main focus is water bore drilling for rural properties, farms, commercial sites and larger residential blocks of one acre or more. We also support selected exploration projects where the proposed work suits our equipment and capabilities.
Each project is planned around the site conditions, access requirements and intended outcome. Our crews place a strong emphasis on safety, reliable equipment, clear communication and straightforward pricing before work begins.
Explore our main services below.
Hard-Rock Water Bore Drilling
Water bore drilling for rural properties, farms, commercial sites and larger residential blocks throughout the Perth Hills and regional Western Australia.
Our equipment is configured for drilling through granite and other hard-rock formations. Before drilling begins, we review the available groundwater information, nearby bore records, site access and local geological conditions to help plan the work.
Groundwater depth, flow rate and quality cannot be guaranteed before drilling.
Learn More →
Bore Cleanouts and Maintenance
Cleaning and redevelopment services for bores affected by reduced flow, sediment, iron-related buildup or mineral deposits.
Depending on the bore’s construction and condition, the work may include airlifting, air lancing, flushing or bore-specific chemical treatment.
Cleaning may improve bore performance in suitable circumstances, but not every bore can be fully restored. B&T Drilling does not carry out structural column repairs or underground casing realignment.
Learn More →
Reverse Circulation Exploration Drilling
Selected RC exploration drilling services for mineral exploration programs across Western Australia.
Our Thor RC 5000 is configured primarily for hard-rock water bore drilling while retaining the capability to undertake RC drilling when required.
Before accepting an exploration project, we review the expected geology, target depths, access conditions, sampling requirements and site standards to confirm that the work is suitable for our equipment and crew.
Learn More →
Groundwater Assessment and Bore Siting
We combine available groundwater records, nearby bore information, local drilling experience and, where requested, traditional water divining to help identify a practical drilling location.
While no method can guarantee groundwater, its depth, flow rate or quality, this assessment supports a more informed decision before drilling begins.
Learn More →
Recent Drilling Projects
Common Questions
Essential Questions Answered
